curt
New Member
Posts: 7
|
Post by curt on May 3, 2009 10:06:20 GMT -5
I downloaded the Radio Chatter quite some time ago, and just now got around to looking at it. Unfortunately, it didn't seem to come with a "read me". Can anyone please advise me as to how to install it? Thanks in advance.
|
|
|
|
Post by engineertman on May 4, 2009 2:10:15 GMT -5
it install in to MC.SND folder
Engineertman
|
|
curt
New Member
Posts: 7
|
Post by curt on May 4, 2009 7:34:17 GMT -5
Yeah, I know that. What I'm asking is, at least based on other cab.sms files I've seen, there are a series of corresponding "xxx.wav" files listed. Seems to me that if I just move the "Chatter.wav" over to an engines Sound folder, that I will then need to edit the cab.sms to read the Chatter.wav.
|
|
|
|
Post by engineertman on May 4, 2009 11:24:48 GMT -5
just copy over the Chatter sound to the folder of the engine that you want to use i don't thank you do not need to edit the cab.sms files.
engineertman
|
|
|
|
Post by MC6853 on May 4, 2009 12:16:17 GMT -5
The radio chatter file installs directly to the TRAINSET folder, as do ALL of my sound releases... The files, when installed properly, will appear inside of a folder named "MC.SND" in your TRAINSET folder... That way all of my sounds are kept in one place...  >>MC |
|
|
|
Post by engineertman on May 4, 2009 16:08:51 GMT -5
Matt that what i was trying to tell him . all of your sound files go in to MC.SND folder in Trainset folder.
engineertman
|
|
curt
New Member
Posts: 7
|
Post by curt on May 4, 2009 20:37:16 GMT -5
Sorry, guys. Let me try and rephrase the question. I understand what you're saying about the MC_Radiochat file being in the MC.SND folder. I've got that part, and that's where it is. What I'm saying is, every other time I've seen an engine's Sound folder that has radio chatter, the corresponding cab.sms Wordpad had some type of radio wav files mentioned inside. In other words, aren't all the sounds (wav files) that you hear inside a cab, listed somewhere in the cab.sms wordpad in order for them to be read and played?
|
|
RDG7600
Heritage Member 
I do not have a personal text
Posts: 83
|
Post by RDG7600 on May 4, 2009 21:39:34 GMT -5
Ok, add this to your "cab" .sms file (after you open it with wordpad...
)
Stream(
Skip ( **** Radio Chatter **** )
Priority ( 5 )
Triggers( 1
Random_Trigger ( Delay_Min_Max ( 75 180 ) Volume_Min_Max ( 0.8 0.9 )
PlayOneShot ( 1
File ( "chatter.wav" -1 )
SelectionMethod ( RandomSelection )
Add it to the bottom of the .sms file. It worked for me. Also make sure that the file is in the folder of the .sms file as well. If your using the MC_EMD645 folder, the "chatter" file must be in the 645 folder.
|
|
curt
New Member
Posts: 7
|
Post by curt on May 5, 2009 7:44:02 GMT -5
That's what I was looking for. Thank you!
|
|
naspa
New Member
Posts: 3 
|
Post by naspa on Nov 1, 2009 11:48:16 GMT -5
Ok, add this to your "cab" .sms file (after you open it with wordpad... ) Stream( Skip ( **** Radio Chatter **** ) Priority ( 5 ) Triggers( 1 Random_Trigger ( Delay_Min_Max ( 75 180 ) Volume_Min_Max ( 0.8 0.9 ) PlayOneShot ( 1 File ( "chatter.wav" -1 ) SelectionMethod ( RandomSelection ) Add it to the bottom of the .sms file. It worked for me. Also make sure that the file is in the folder of the .sms file as well. If your using the MC_EMD645 folder, the "chatter" file must be in the 645 folder. I've done this but am not getting any chatter in the cab... what am I likely to have done wrong? |
|
