Problem w/sounds after a re-install

[cpman]

I'm having some problems with Matt's sound sets after re-installing my MSTS and it's driving me nuts! When I went to run an engine that was aliased to his sounds and the cab came up, the locomotive sounds were notch 8. As I throttled up to 13% and 25%, the notch 8 sound in the can started getting higher and higher pitched, then at 50%, it just cut out completlely and the only the horn works in the cab. However, everything is fine outside the cab. It does this with all of his sound sets. I have deleted the sounds, re-installed them and re-aliased, but I'm still getting the same problem. All my other sounds work fine. Anybody know what's up here? I had 95% of my locos aliased to his sets and would like to be able to run them again.

Thanks in advance!

[MC6853]

I hear of this error every now and then and honest to god I do not know how to fix it...

>>MC

[jokel317]

Have you tried lowering your sound hardware acceleration settings?

Don`t know if it look`s the same in Vista or not.

Control Panel>Sounds and Audio Devices>Volume tab>speaker settings>advanced

[CJ The CW60AC and SD80MAC Man]

I had the same problem and i was able to fix it by checking the audio sliders in the sim to make sure they are set to the max and you should be set .

[cpman]

Jun 16, 2009 23:39:07 GMT -5 CJ The CW60AC and SD80MAC Man said:

I had the same problem and i was able to fix it by checking the audio sliders in the sim to make sure they are set to the max and you should be set .

Thanks a bunch! That fixed it. My life is now back to normal! Lol, just kidding, but thanks a ton. That was driving me NUTS!!!!

Kudos to Matt for the awesome sounds! Keep them coming. ;D

[CJ The CW60AC and SD80MAC Man]

No problem any time . Matt i think this needs to be stickey for sound problems .