txx58
New Member
Posts: 8
|
Post by txx58 on Jun 8, 2009 13:46:24 GMT -5
Hi guys, say just wondering about the ' radio chatter ' wav file,...which sound folder does it go in? ( to hear the chatter in the cab ), and does it need to be in more than 'sound folder'? Thanks!
Tim
|
|
lystermak2
Member
Suspended until 08/15/09
95%
Posts: 47
|
Post by lystermak2 on Jun 8, 2009 14:15:13 GMT -5
The MCLW radio chatter goes to the same folder as all of the sound sets that Matt Florack made.
|
|
txx58
New Member
Posts: 8
|
Post by txx58 on Jun 9, 2009 10:44:33 GMT -5
Thanks for the reply, but you failed to mention 'the specific' folder for the 'wav' file..i have looked at my .zip and iit's not very specific as to placement.. i have 3 MCLW folders (all related to 'sounds', Any help would be appreciated! Thanks, again.
Tim
|
|
|
Post by kevraff on Jun 9, 2009 17:24:41 GMT -5
Thanks for the reply, but you failed to mention 'the specific' folder for the 'wav' file..i have looked at my .zip and iit's not very specific as to placement.. i have 3 MCLW folders (all related to 'sounds', Any help would be appreciated! Thanks, again. Tim You have 3?folders you should only have 1 M.C Sound with all the other sound sets inside of that folder.
|
|
RDG7600
Heritage Member
I do not have a personal text
Posts: 83
|
Post by RDG7600 on Jun 9, 2009 21:46:00 GMT -5
|
|
txx58
New Member
Posts: 8
|
Post by txx58 on Jun 10, 2009 13:54:08 GMT -5
OK, i've read the previous threads, good suggestions ... i have my 'chatter .wav' in the MC_EMD710 folder, but i still get no 'radio chatter'..this is really frustrating, I noticed that when the files are sent to my 'TRAINSET' folder ..there are (2) folders installed; the main one is, MC.SND and if you open that one you find no.2 MC_EMD710 (Where the 'chatter.wav' is located) is this the correct location? Thanks! for your help.
Tim
|
|
|
Post by kevraff on Jun 10, 2009 17:30:22 GMT -5
OK, i've read the previous threads, good suggestions ... i have my 'chatter .wav' in the MC_EMD710 folder, but i still get no 'radio chatter'..this is really frustrating, I noticed that when the files are sent to my 'TRAINSET' folder ..there are (2) folders installed; the main one is, MC.SND and if you open that one you find no.2 MC_EMD710 (Where the 'chatter.wav' is located) is this the correct location? Thanks! for your help. Tim Well that sounds right....you should have a folder called MC_radiochat with-in the main folder.
|
|
txx58
New Member
Posts: 8
|
Post by txx58 on Jun 11, 2009 8:08:40 GMT -5
Hi,..OH! you are right, but now i have (3) folders instead of the previous (2), My question is should all the files be in one folder? (which one?) or leave them in the indivigual folders? Thanks! again for your help.
Tim
|
|
|
Post by kevraff on Jun 11, 2009 14:46:35 GMT -5
Hi,..OH! you are right, but now i have (3) folders instead of the previous (2), My question is should all the files be in one folder? (which one?) or leave them in the individual folders? Thanks! again for your help. Tim Leave them in there individual folders inside the main MC_sound folder otherwise you will have problems
|
|
txx58
New Member
Posts: 8
|
Post by txx58 on Jun 12, 2009 7:48:59 GMT -5
Hi, say do i have to edit the .eng files or cab.sims files? Thanks!
Tim
|
|
|
Post by MC6853 on Jun 12, 2009 23:27:12 GMT -5
To the original poster-- sorry I didn't see this topic sooner... The chatter file should go into a file named "MC_radiochat"... I don't know if that was already said or not but that's the proper location for it... >>MC
|
|
RDG7600
Heritage Member
I do not have a personal text
Posts: 83
|
Post by RDG7600 on Jun 14, 2009 14:17:21 GMT -5
You don't need to edit the .eng file, as long as you have it aliased to an MC sound set. Now, here's what I did. Hope this helps.
|
|